Discussion on the 7 use of the test equipment of the commercial concrete mixing
2016-03-08 17:14:11
Commercial concrete mixing station test apparatus using hydraulic loading, electronic force measuring; with digital display of test force and the loading speed and keep the maximum test force. The machine can also configure the computer, which can perform digital acquisition and processing, can also direct the print test results and storage.
Seven commercial concrete mixing station test instrument use matters needing attention, analysis as follows:
1, concrete mixing station test instrument has no direct exposure to the sun on the instrument and can not have a strong shock.
2, if the long-term use of commodity concrete mixing station test instrument, each instrument must be two to three times a week to boot, each boot time is not less than half an hour.
3, concrete mixing station test equipment shall have good ventilation conditions, instrument placement must be stable. Using the best instrument table at room temperature 25 degrees.
4, should pay special attention to moisture, when not in use should be dustproof cover.
5, commodity concrete mixing station test equipment must be cleaned every day, in order to avoid dust too much influence the instrument normal work.
6, high power electrical power supply is the best way to go, so as not to affect the normal work of other instruments.
7, the power supply must be stable, the voltage fluctuation can not exceed 5%. if beyond this range, must use the voltage stabilized power supply.
Seven commercial concrete mixing station test instrument use matters needing attention, analysis as follows:
1, concrete mixing station test instrument has no direct exposure to the sun on the instrument and can not have a strong shock.
2, if the long-term use of commodity concrete mixing station test instrument, each instrument must be two to three times a week to boot, each boot time is not less than half an hour.
3, concrete mixing station test equipment shall have good ventilation conditions, instrument placement must be stable. Using the best instrument table at room temperature 25 degrees.
4, should pay special attention to moisture, when not in use should be dustproof cover.
5, commodity concrete mixing station test equipment must be cleaned every day, in order to avoid dust too much influence the instrument normal work.
6, high power electrical power supply is the best way to go, so as not to affect the normal work of other instruments.
7, the power supply must be stable, the voltage fluctuation can not exceed 5%. if beyond this range, must use the voltage stabilized power supply.
previous_page：Test equipment industry needs to break through the four major bottlenecks
next_page：New standard of test equipment for concrete mixing station
